KenC
Member
- Joined
- Sep 8, 2003
- Messages
- 189
- Reaction score
- 1
I've been getting my BC Ski gear ready for this, my first, ski season. I am getting ready to put the Tenney Toe Plates which were recomended on and have a question...
The plates come with 4 screws, 2 outside 2 inside. However Scarpa has put a steel re-enforcing plate moulded inside the toe about 1/8" below the sole. The placement of the plate will only allow me to put the 2 outside screws into the plate. I'm thinking i should just go ahead and install and epoxy them with the 2 screws. Any comments from the "most knowledge" sources here.
Thanks in advance
Ken
The plates come with 4 screws, 2 outside 2 inside. However Scarpa has put a steel re-enforcing plate moulded inside the toe about 1/8" below the sole. The placement of the plate will only allow me to put the 2 outside screws into the plate. I'm thinking i should just go ahead and install and epoxy them with the 2 screws. Any comments from the "most knowledge" sources here.
Thanks in advance
Ken